Kitchen Cabinet Makeover Budget for under $100

Remodeling or reface kitchen cabinets your kitchen is one of the tasks of the most expensive remodeling can take home. Costs can be cut a little of the work yourself. One of the areas you can save money Refacing your kitchen cabinets instead of replacing them. So kitchen cabinets rectification is cheaper than installing a new one, which is not always worth it.

If the cabinets are generally in good condition and real wood and plywood, and then clean will result in a good-looking kitchen. If the cabinets are in poor condition or made of particle board or press board, it makes no sense to go through the expense of their renewal planning and preparation once you decide to rectify your kitchen cabinets, you have to take some decisions. Will you do the cleaning work yourself or hire a professional? Although there are many companies that offer the surface, which is the hand and the patient do the work yourself is a great way to save money.

Steps reface kitchen cabinets:-

 If you choose to complete the renovation work yourself or hire a professional, you need to decide the degree of update you want to take and how you want your kitchen to look over. Refacing your kitchen cabinets can be as simple as removing and replacing doors, paint the cabinets largest cleaning, applying a veneer wood grain to your old cabinets .

Regardless of how minor update, can significantly change the look of your kitchen by changing the drawer handles. Introduction If you decide to do the job of cleaning it, there is a lot of preparation involved. As in many projects home remodeling, the prep work is longer, but equally important, the real work.

 Organized. Remove all doors from the kitchen and the label, so when the time comes to put the doors, you'll know where they belong. Remove all hinges and handles, set aside and put the screws in a small container so they do not lose. Get clean. No matter how careful you keep your kitchen cabinets will have a thorough cleaning before the cleaning process.

 After an initial cleaning with a cleaning solution usually follow up with paint thinner or denatured alcohol. This will cut the oily residue that accumulates each cabinet. The residue is particularly sensitive to the location of the hinges and handles. To effectively clean the closets, rub a small area at a time with your cleaner and a piece of steel wool.

 Wipe the area with a clean paper towel immediately. Repair. Once you have the cabinets and doors to thoroughly clean, can repair dents or dings that have developed during their lifetime. Use wood putty to cover the damaged area and then sand smooth. After completing all the repair work, it's back to cleaning.

Clean some more. By completing and sand the cabinets, remove the dust. This prevents dust from sticking to the plating surface of the cabin. After all the repair work, clean the box again, and follow with a tack cloth, which should remove the last traces of dust on the furniture. Apply the varnish. The actual process of applying the veneer wood grain is simple, but you have to take your time.

 It's easy to do if you have someone to help you. Mapping support is very sticky, and if you make a mistake put it in your cabinets, it is very difficult to move. Assembly time. Once the wood grain of the veneer on the cabinets, you are ready to replace the doors. If you numbered the doors before they retire, should be a relatively simple process.

 Finishing Touches. To polish the look of your kitchen, add new handles and knobs. If the cabinets have door knobs and handles, replacing them is a simple process. If your cabinets do not have them, carefully measure and mark all the drawers and doors before drilling the holes. Now step back and admire your work. Your new kitchen is sure to receive rave reviews. reface kitchen cabinets So live a happy life.

Enhanced by Zemanta

No comments:

Post a Comment